The asbestos textile products service the needs of the industry in a number of general and specialised applications, such as: thermal insulation, fibre protections, packings and jointings, diaphragms for electrolytic cells, base material for friction materials and industrial plastics, etc.
ASBESTOS YARN ( METALLIC/NON-METALLIC)
A vital raw material made with Metallic wires such as Zinc, Brass & Copper for the manufacture of Automobile Clutch Facings. For the heat insulation of small pipes, electric cables, sealing joints in flexible metal tubing. For steam Hoses, Packing in Patent Glazing, Steam Valves, Water Cocks etc.
SIZE: 1.5 mm to 6 mm in spool : 0.5 kg to 1 kg
RECOMMENDED
STYLE : FMY-101: FMY-111-121-131, Temperature 300 C
ASBESTOS CLOTH ( METALLIC/NON-METALLIC) Asbestos Cloth is manufactured in range like open weave to close textures in metallic and non-metallic depending on requirements and usage of industries, are used in Boilers, Pipelines, in Power Stations Ships for Thermal Insulation, Boiler mattresses for protective clothing and fire protection, gloves, suits, blankets, aprons, safety curtains and many more purposes.
SIZE : Width 42" approximately
1.5 mm to 6 mm 50/55 kgs approximately
RECOMMENDED :
STYLE.: FMC-301-311 : Temperature 350 C
ASBESTOS FIBRE FILLED ROPE LAGGING A low density Fibre filled Rope enclosed in a wide braided cover. Used extensively for the insulation of Stream pipeline in marine. Hot water pipes exhaust units and power plants.
SIZE : 12mm to 51 mm in coils of 30 meters.
RECOMMENDED :
STYLE.: FML - 401 : Temperature 300 C
ASBESTOS RUBBER PROOFED CLOTH/TAPE/GASKETS (METALLIC/NON-METALLIC) An all purpose gasket material for sealing the manhole covers on boiler tank and pressure vessels doors and other applications against air, water, steam and alkalis. Specially suitable as a seal between uneven or non machined surfaces.
SIZE : Width: 12 mm to 100 mm
Thickness: 3mm to 6mm in tape form 30 meters coil
Rubberised cloth: 2mm, 3mm, 5mm, 6mm, 10mm in 40" width in roll form.
RECOMMENDED :
STYLE.: FMT - 501-501 (M) : Temperature 175 C
ASBESTOS WHITE ROPE Asbestos Dry Plaited general steam and insulation packing for hot gases, oven autoclaves etc. conforming to IS specification 4687/1980 and DGS & D Specification.
RECOMMENDED :
STYLE.: FMP - 201 : Temperature 350 C
ASBESTOS WOVEN TAPE (METALLIC/NON-METALLIC) Are used for wrapping the exhaust pipes, hot and cold insulation, electric cables, lining switch boxes, drying oven, conveying hot articles in glass industries, oil lamps and heater. Available in Metallic and Non-Metallic.
SIZE : Width: 12.5 mm to 150 mm
Thickness: 1.5 mm to 6 mm in 60 meter coil.
RECOMMENDED :
STYLE.: FMT - 511-511 (M) : Temperature 275 C
FEROLITE GLAND PACKINGS
To achieve zero leakage between a moving member and a relatively stationery part, a wide range of seals and rings are employed. However, the most common, least expensive and versatile in nature is the Gland Packing. It provides a dynamic seal for a rod, shaft or stem via a housing or gland which is packed with resilient or semi-resilient material, thus providing a localised contact area which offers a physical barrier to leakage .
Lubricated and Graphited asbestos Gland packing for reciprocating & rotary pumps, medium pressure conditions conforming to IS specification 4687/1980 & DGS&D specifications.
RECOMMENDED :
STYLE FMP-211: Temperature 325 C
Asbestos yarn DUPLEX BRAIDED packing impregnated with PTFE suspenoid for severe caustic and other corrosive chemicals, solvents, oils and petroleum by-products & oxygen services
RECOMMENDED :
STYLE FMPT - 601 Temperature 150 to 300 C
Incorporated with white metal wire for low friction and greater mechanical durability. Suitable for rotary shafts with peripheral speeds upto 1750 ft/min. recommended for steam, hot water, weak acids and alkalis.
RECOMMENDED :
STYLE FMT-221 Temperature 350 C
Brass wire reinforced asbestos yarn packing, specially suited to high speed rotary and reciprocating shafts even at higher temperature and pressure. Incorporation of brass wire improves its strength and anti-friction properties. It is recommended for saturated and super heated steam, hot water, air gases, oils, steam expansion glands, rotary and reciprocating equipment.
RECOMMENDED :
STYLE FMP - 231 Temperature 500 C
Non-metallic asbestos lubricated and graphited packing for high pressure saturated super heated steam conforming to IS specification 4687/1980 & DGS&D specifications.
RECOMMENDED :
STYLE FMP - 241 Temperature 490 C
Braided from high grade asbestos yarn, suitably lubricated & reinforced with stainless steel wire. This is an ideal choice for high temperature valve application and is suitable for service with steam, butane and propane gases, oil vapour, furnace oil etc. Please state when spindle/rod is STAINLESS STEEL.
RECOMMENDED :
STYLE FMP - 261(S) Temperature 815 C
A duplex braided for super sealing jobs made from high grade asbestos yarn reinforced with inconel wire and suitable lubricated. It will function most effectively against super sealing jobs on valve stems in power plants, oil refineries. A well recommended packing for control valves at high pressures and temperatures and various other applications. Please specify when rod/spindle is STAINLESS STEEL.
