ASHOKA STEELS :: PTFE UHMWPE PVC HDPE CAF Derlin Nylon Metalon Teflon Glasswool Carbon Rubber Sheet Hardware Goods Carbon Graphite
 
STEAM JOINTINGS SHEETS,
RUBBER & CORK SHEETS,
TEFLLON PRODUCTS,
ASBESTOS ROPE,
YARN & SHEETS,
ASBESTOS & COTTON GLAND, PACKING,
WOLLEN FELT,
STEEL WIRE ROPE & FITING,
V.BELTS & CHAIN PULLY- BLOCKS TEFLLON,
NYLON : P.P SHEETS,
RODS : BUSH & WELDING - PRODUCTS,
   
 
TEFLON, NYLON/DELRIN, P.P, P.U, UHMWPE, METALON, PVC ROD AND SHEETS, HDPE
ACRYLIC & POLYCARBONATE
ASBESTOS AND NON ASBESTOS JOINTING SHEETS
ASBESTOS & NON ASBESTOS Packing
   
ASHOKA STEELS
ASHOKA STEELS :: PTFE UHMWPE PVC HDPE CAF Derlin Nylon Metalon Teflon Glasswool Carbon Rubber Sheet Hardware Goods Carbon Graphite
  Home Products Asbestos Jointings Sheets

 
  ASBESTOS JOINTINGS SHEETS
FEROLITE 333

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To Seal off Steam, Air, Water , various alkaline chemicals Under low stress conditions..
MATERIAL TYPE: : COMPRESSED ASBESTOS FIBER (CAF)
THICKNESS  : 0.40 mm to 6.00 mm.
SURFACE FINISH : Red, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 35 Kg/cm2
Maximum Temperature: 380°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 3
ASBESTOS JOINTINGS SHEETS
FEROLITE

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
Excellent sealing in wide range of industrial applications under low & medium stress conditions & is suitable to seal off Air, water, Steam, saline solution, alkaline, ammonia & mildly aggressive.

 
MATERIAL TYPE : COMPRESSED ASBESTOS FIBER (CAF)
THICKNESS  : 0.40 mm to 6.00 mm.
SURFACE FINISH : Red, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 45 Kg/cm2
Maximum Temperature: 440°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 3
FEROLITE Extra

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
Suitable to seal off Steam, Air, water, Natural gas, Petrol, Saline solution, Alkalies, Ammonia & serval other Non-Aggressive media under medium stress conditions. The following Information Applies to material Thickness 1.5mm.

 
MATERIAL TYPE : COMPRESSED ASBESTOS FIBER (CAF)
THICKNESS  : 0.25 mm to 6.00 mm.
SURFACE FINISH : Red, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 70 Kg/cm2
Maximum Temperature: 450°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 2
FEROLITE IT 300

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To seal off Air, Water, Steam, Natural gas, Petrol, Saline solution, Alkalies, Ammonia & serval other Non-Aggressive media under medium stress conditions.

MATERIAL TYPE : COMPRESSED ASBESTOS FIBER (CAF)
THICKNESS  : 0.40 mm to 6.00 mm.
SURFACE FINISH : Red, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 140 Kg/cm2
Maximum Temperature: 550°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 1
FEROLITE IT 400

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To seal off Air, Water, Steam, Natural gas, Petrol, Saline solution, Alkalies, Ammonia & serval other Non-Aggressive media under medium stress conditions.

 
THICKNESS  : 0.25 mm to 6.00 mm.
SURFACE FINISH : Red, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 150 Kg/cm2
Maximum Temperature: 550°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 1
FEROLIT

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
Suitable to seal off Motor oil, Carburetor mixture & Hydraulic fluids, low temperature, Oils steam, Alkalies & Water/ antifreeze and water/ anti corrision mixture. highly suitable for internal combustion engines, compressors, pipes etc.

 
THICKNESS  : 0.25 mm to 6.00 mm.
SURFACE FINISH : Green, Grey , Graphited
OPERATING CONDITION : Maximum pressure      : 100 Kg/cm2
Maximum Temperature: 460°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE O / 2
FEROLIT 'F'

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers.

Applications :
Suitable to seal off Motor oil, Carburetor mixture, most transmission and hydraulic fluids refrigerating oils, fuels, steam, alkalies, water/antifreeze and water/anti-corrosion mixtures. this grade offers high oil and fuel resistance.

 
THICKNESS  : 0.25 mm to 6.00 mm.
SURFACE FINISH : Green, Graphited
OPERATING CONDITION : Maximum pressure      : 50 Kg/cm2
Maximum Temperature: 450°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE 
FEROLITE SPECIAL

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers and Inorganic fillers.

Applications :
Suitable To Seal off Steam, hot Oils, & various aromatic Hydrocarbons, solvents & Refrigerants in high stress conditions.

THICKNESS : 0.25 mm to 6.00 mm.
SURFACE FINISH  : Green/Green
OPERATING CONDITION  : Maximum pressure : 140 Kg/cm2
Maximum Temperature: 550°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE O / 1, W / 1
FEROLITE 'CS'

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers and Inorganic fillers.

Applications :
Suitable for controlled swelling in oil medium stress conditions & is suitable for internal combustion engine as well as in compressors pipe system.
 
THICKNESS : 0.25 mm to 6.00 mm.
SURFACE FINISH  : Yello
OPERATING CONDITION  : Maximum pressure : 100 Kg/cm2
Maximum Temperature: 500°C
SPECIFICATION COMPLIANCE : ASTM:F104 F112950 M 7
FEROLITE IT 'O'

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To seal off most transmission and hydraulic fluids,refrigerating oils, motor oils, carburetor fuel mixtures steam, water/antifreeze & water/ anti corrision mixtures alkalies & solvents.

 
THICKNESS

:

0.30 mm to 4.00 mm.

SURFACE FINISH : Grey, Graphited
OPERATING CONDITION : Maximum pressure : 150 Kg/cm3
Maximum Temperature: 560 ° C
SPECIFICATION COMPLIANCE : ISI 2712 / 1998 Grade O / 1, W / 1
FEROLITE IT 'S'

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To seal of aggressive organic acids alkalies, alcohals, easters & ketones.

 
THICKNESS

:

0.40 mm to 6.00 mm.

SURFACE FINISH : Blue
OPERATING CONDITION : Maximum pressure : 20 Kg/cm2
Maximum Temperature : 150 ° C
SPECIFICATION COMPLIANCE : DIN : 3754 IT “S”
FEROLITE IT 'C' Universal

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic & Natural Elastomers and Inorganic fillers.

Applications :
To seal of aggressive organic acids alkalies, alcohals, easters & ketones.

 
THICKNESS

:

0.25 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 200 Kg/cm2 Maximum Temperature: 550 ° C
SPECIFICATION COMPLIANCE : ISI : 2712 / 1998 Grade O / 1, W / 1
FEROLITE - Acid
Material Type: Compressed Asbestos Fiber (CAF)
Material Composition: Made from Chrysotile Asbestos fiber with Synthetic Elastomers and Inorganic fillers
Application: Suitable to seal perfectly against destructive actions of hot or cold concentrated acids including oleum under specified conditions of temperature and pressure.
Thickness: 0.40 mm to 6.00 mm.
Surface Finish: Light grey.
Operating Condition: Maximum pressure:  160 Kg/cm 2
Maximum Temperature 220 °C
Specification Compliance: ISI: 2712/1998 Grade A/1
ASBESTOS JOINTINGS SHEETS
FEROLITE 333 Steel

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers with a Corrosion Resistant Metal Gauge Centre.

Applications :
For low & medium stress conditions and is suitable to seal off steam, Air, Water, & various Alkaline Chemicals.

 
THICKNESS

:

0.80 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 80 Kg/cm2
Maximum Temperature: 415 ° C
FEROLITE Extra Steel

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers with a Corrosion Resistant Metal Gauge Centre.

Applications :
To seal off steam, Air, Water, Natural gas, Petrol, Saline solution, Alkalies ammonia & several other non-aggressive media under medium conditions.

THICKNESS

:

0.80 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 90 Kg/cm2Maximum Temperature: 480 ° C
FEROLITE IT 300 Steel

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Elastomers with a Corrosion Resistant Metal Gauge Centre.

Applications :
To seal off steam, Air, Water, Steam Saline solution, Alkalies ammonia Propane, Producer gas & mildy aggressive media high stress conditions.

 
THICKNESS

:

0.80 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 160 Kg/cm2
Maximum Temperature     : 480 ° C
FEROLITE IGV

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Oil & Solvent resistant elastomers with a Corrosion Resistant Metal Gauge Centre.

Applications :
Where high Mechanical and Thermal stress is encountered.

 
THICKNESS

:

0.60 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 200 Kg/cm2
Maximum Temperature     : 600 ° C
ASBESTOS JOINTINGS SHEETS
FEROLITE ISS

Material Composition :
Made from Chrysolite Asbestos Fiber with Synthetic Oil & Solvent resistant elastomers with a Corrosion Resistant Metal Gauge Centre.

Applications :
Where high Mechanical and Thermal stress is encountered. For water, air, fuels, alcohols, IC engines, compressors etc.

 
THICKNESS

:

0.60 mm to 6.00 mm.

SURFACE FINISH : Grey , Graphited
OPERATING CONDITION : Maximum pressure : 200 Kg/cm2
Maximum Temperature     : 600 ° C
 
 
Home  |  Company  |  Contact Us  |  Enquiry
 
Copyright ©2007. Ashoka Steels. All Rights Reserved.
Website Designing by www.buzzinessworld.com