FEROLITE ® Style FMP-802 Pure Graphite fibre interlock braided gland packing. This packing can also be supplied with a reinforcement of inconel/ special alloy wire for higher temperature applications.
Temperature
Pressure
pH
550°C (in steam)
430°C (any chemicals)
180 bar (NonMetallic)
250 bar (Metallic Reinforced)
0-14
Suitable for handling acids, oils, solvents, super heated steam, bitumen, boiler feed water, hot tar, SO2 & SO3 etc.
FEROLITE ® Style FMP-507 A perfect combination inter braid packing having Graphited PTFE (GFO) fibres at the faces and special Aramid fibre at the corners.
Temperature
pH
-200°C to +260°C
0-13
Recommended for handling sewage water. hot water, oils, greases, gases, weak acids, alkaline solutions, abrasive media, paper mill chemicals like black liquor, green liquor, white liquor etc
FEROLITE ® Style FMP-872 A cross braided combination packing of pure PTFE fibre and pure Graphite fibre.
Temperature
pH
300°C (Max)
0-14
Suitable for handling corrosive/ non corrosive gases, acids, oils etc.
FEROLITE ® Style FMP-881 A pure PTFE interlock braided packing impregnated with a PTFE suspensoid and a high flash point lubricant
Temperature
pH
-200°C to 250°C
0-14
Suitable for handling corrosive gases, acids and ammonia, hydrocarbons, solvents, foodstuffs, valve applications etc.
FEROLITE ® Style FMP-503 A PTFE Graphited yarn gland packing in interlock braid.
Temperature
pH
-200°C to +260°C
0-14
Recommmended for handling caustics, acids, dyes and chemicals, oils & solvents, detergents etc.
FEROLITE ® Style FMP-858 A Pure GFO ® fibre gland packing, interlock braided
Temperature
Pressure
pH
-200°C to 300°C
150 Bar Max
0-14
Excellent for all chemical slurries,caustics, acids, alkali, dyes & chemicals, oil, solvents, tar, pitch, boiler feed water, condensate, cold & hot water etc.
FEROLITE ® Style FMP-845 An interlock braided packing having pure PTFE fibre as its base and Aramid fibre at the edges
Temperature
pH
-200°C to +260°C
1-14
Suitable for handling carbomate solutions, ammonia and ammonia compounds, DMT, dozing pumps, critical compounds used in the petrochemical industry etc.
FEROLITE ® Style FMP-510 A duplex braided vegetable fibre (FLAX) yarn packing impregnated with a PTFE dispersion and a break in lubricant
Temperature
pH
120°C (Max)
6-8
Suitable for handling oils, foodstuffs, sea water, surface water, general service etc.
FEROLITE ® Style FMP-868 A duplex braided Ramie fibre yarn packing impregnated with PTFE suspensoid. A break in lubricant can be provided for specific applications
Temperature
pH
120°C (Max)
6-8
Suitable for handling cold water, drinking water, raw water, sea water, warm water, oils, brines, solvents, foodstuff, abrasive or crystalline media containing sand or any other solid particles etc.
FEROLITE ® Style FMP-511 A soft vegetable fibre (FLAX) yarn packing impregnated with PTFE
Temperature
pH
120°C (Max)
6-9
Suitable for handling hot water, cold water, DM water, condensate etc.
CERAMIC FIBRE BRAIDED ROPE
Reference
Sizes
Shapes:
Construction
Service Temp
Melting Point
Insert
Composition
Loss on Ignition
Application
FMP-702
: 6mm to 75mm
: Round & Square
: Closely Braided/Knitted
: 1260 0 C
: 1760 0 C
: Fibreglass Yarn / SS wire
: Aluminium Silicate
: < 18 %
: Furnace / Boiler Door insulation & seal
Coke Oven door jam seal
Expansion Joint packing
High Temperature Gasketing & Packing
Maintenance in Foundaries, Refineries, Power Plants & Steel Plants
CERAMIC FIBRE TAPE
Reference
Sizes
Construction
Service Temp
Melting Point
Insert
Composition
Loss on Ignition
Application
: CFT-1
: 1” – 4” Width ; 3mm Thick
: Plain Woven
: 1260 0 C
: 1760 0 C
: Fibreglass Yarn / SS wire
: Aluminium Silicate
: < 18 %
: Gasket & Wrapping Material
Fuel Line Insulation
Wrap for Equipment Protection
