:: ASHOKA STEELS :: PTFE UHMWPE PVC HDPE CAF Derlin Nylon Metalon Teflon Glasswool Carbon Rubber Sheet Hardware Goods Carbon Graphite Asbestos



	STEAM JOINTINGS SHEETS, RUBBER & CORK SHEETS, TEFLLON PRODUCTS, ASBESTOS ROPE, YARN & SHEETS, ASBESTOS & COTTON GLAND, PACKING, WOLLEN FELT, STEEL WIRE ROPE & FITING, V.BELTS & CHAIN PULLY- BLOCKS TEFLLON, NYLON : P.P SHEETS, RODS : BUSH & WELDING - PRODUCTS,

	TEFLON, NYLON/DELRIN, P.P, P.U, UHMWPE, METALON, PVC ROD AND SHEETS, HDPE
	ACRYLIC & POLYCARBONATE
	ASBESTOS AND NON ASBESTOS JOINTING SHEETS
	ASBESTOS & NON ASBESTOS Packing

ASHOKA STEELS :: PTFE UHMWPE PVC HDPE CAF Derlin Nylon Metalon Teflon Glasswool Carbon Rubber Sheet Hardware Goods Carbon Graphite

Home

Products

Asbestos Jointings Sheets

NON ASBESTOS JOINTINGS SHEETS

MATERIAL GRADE : FEROLITE NAM 39

Material Composition :
Made from Aramid fibre, Mineral fibre & Inorganic bounded with Synthetic NBR Elastomers.

Applications :
Suitable for high performance, Oil resistance gasket material with excellent thermal, chemical & mechanical properties.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum internal pressure: 70 BAR Maximum Temperature: 250 ° C

MATERIAL GRADE : FEROLITE NAM 37

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 100 BAR Maximum Temperature : 250 ° C

MATERIAL GRADE : FEROLITE NAM 30

Material Composition :
Made from Aramid fibre, Mineral fibre & Inorganic bounded with Synthetic NBR Elastomers.

Applications :
Suitable for oil resistance gasket material for medium to higher loading, good resistance to water gases, oils & fuels. A standard sealing material used in compressors, pipelines, apparatus, transmission, gas meters and internal combustion engines.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 100 BAR Maximum Temperature : 250 ° C

MATERIAL GRADE : FEROLITE NAM 32

Material Composition :
Made from Aramid fibre, Mineral fibre & Inorganic bounded with SBR Elastomers.

Applications :
Gasket material with controlled swell properties in oil, wide range of application in automative and chemical industry. Suitable to seal off hydraulic, engine, transmission and refrigerating oils as well as other hydrocarbons. Also applicable for joints with low sealing pressure like housing , valve covers, oil pans etc.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 150 BAR Maximum Temperature : 250 ° C

MATERIAL GRADE : FEROLITE NAM 33

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 90 BAR Maximum Temperature : 250 ° C

MATERIAL GRADE : FEROLITE NAM 32 N

Material Composition :
Made from Aramid fibre, Mineral fibre & Inorganic bounded with NBR Elastomers

Applications :
Contains high amount of mineral fibre whcih is bi-soluble and thus does not pose any health hazard. It does not contain any material which might contribute to bacterial or fungal growth. It is used in food grade/ drug applications.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 150 BAR Maximum Temperature : 100 ° C

MATERIAL GRADE : FEROLITE NAM 42 GF

Material Composition :
Made from Aramid Fibre, Glass Fibre with NBR.

Applications :
It has high media resistance. It also has high stress condition.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 440 ° C Max. Cont. Temp. : 2 50 ° C Maximum Op. Pressure : 150 Kg/cm²

MATERIAL GRADE : FEROLITE NAM 45 CF

Material Composition :
Made from Aramid Fibre, Carbon Fibre with NBR.

Applications :
For Medium to higher Lodings. Excellent for steam & Alkalies. Used in Chemical & Petrochemical industries. Pulp, paper, chemical & petrochemical industries.

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 50 0 ° C Max. Cont. Temp. : 2 50 ° C Maximum Op. Pressure : 100 Kg/cm²

MATERIAL GRADE : FEROLITE NAM 32 CR

Material Composition :
Made from Aramid fibre with CSM Elastomers.

Applications :
This has excellent chemical resistance to acid and alkali media

THICKNESS	:	0.25 mm to 3.00 mm.
OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C Maximum pressure : 150 BAR Maximum Temperature : 100 ° C

MATERIAL GRADE : FEROLITE NAM 39 STEEL

Material Composition :
Aramid fibre, NBR & Organic Fibre with Metal Gauge Centre

Applications :
- Water/Oil resistant
- For light to medium loadings
- Suitable for low operating pressure, eg transformers, compressors and oil pans in internal combustion engines.

OPERATING CONDITION	:	Maximum Peak Temp. : 400 ° C
		Maximum pressure : 250 BAR
		Maximum Temperature : 90 ° C

MATERIAL GRADE : FEROLITE NAM 37 STEEL

Material Composition :
Aramid fibre, Mineral Fibre and NBR with Metal Gauge Centre.

Applications :
- Water/Oil resistant
- For light to medium loadings
- Suitable for low operating pressure, eg transformers, compressors, valve covers and oil pans in internal combustion engines

OPERATING CONDITION	:	Maximum Peak Temp. : 450 ° C
		Maximum pressure : 250 BAR
		Maximum Temperature : 12 ° C

MATERIAL GRADE : FEROLITE NAM 30 STEEL

Material Composition :
Aramid fibre, Mineral Fibre and NBR with Metal Gauge Centre.

Applications :
- Oil resistant
- For medium to higher loadings
- Resistant to water and gases eg compressors, pipelines, gas meters and IC engines

OPERATING CONDITION	:	Maximum Peak Temp. : 500 ° C
		Maximum pressure : 250 BAR
		Maximum Temperature : 10 ° C

MATERIAL GRADE : FEROLITE NAM 32 STEEL

Material Composition :
Aramid fibre, Mineral Fibre and NBR with Metal Gauge Centre.

Applications :
- High performance oil resistant
- Excellent thermal, chemical & mechanical properties
- For compressors, pipelines, gas meters and IC engines, pipe unions, pumps etc

OPERATING CONDITION	:	Maximum Peak Temp. : 500 ° C
		Maximum pressure : 250 BAR
		Maximum Temperature : 150 ° C