Nylon rods sheets and profiles are manufactured using the Extrusion Technique and hence have excellent physical and Mechanical properties. Nylon offers good machineability for all types of metal working equipment including lathes grinders, millers and more. It is recommended to use sharp cutting tools, high machining speeds together with relatively slow feed.
Nylon rods and sheets are used in various industrial application including textile, railways, automobile, food processing, electrical and electronics, defence, appliance manufacturing industries and more. Some of the important uses are pulleys, gears, bushes, nuts, bolts, rollers, tool handles,
softblow hammers, shuttles, castor wheels, bearings, washers, spindles, grommets, door catchers, tuning shafts, engine mountings, small components of air conditioners and refrigeration units.
Sizes :
Our range of nylon rods, sheets and profiles are available in following sizes:
Rods [ White ] : 6 MM – 10 “ OD; Length: 300 MM & 1000 MM
Rods [ Black ] : 12.5 MM – 5” OD; Length: 300 MM & 1000 MM.
Sheets [ White and Black ] : 6 MM Thick – 100 MM Thick; 300 x 300 MM ; 600 x 600 MM; 1000 x 1000 MM.
Characteristics :
Some of the important characteristics of nylon are:
Excellent wear resistance, self lubrication and small coefficient of friction.
Superior heat resistance and non-inflammability
Superior shock absorbing properties
Very good impact resistance and toughness
Good electrical properties
Excellent abrasion resistance
Good dimensional stability
Light in weight
Anti corrosive
Polyacetal Rods & Sheets [Delrin]
Polyacetal is a thermoplastic polymer, which is produced by the polymerization of formaldehyde. It is a highly crystalline thermoplastic with characteristics such as high tensile strength, stiffness, low coefficient of friction and excellent dimensional stability.
Polycetal offers resilience and creep resistance, natural lubricity and can be used under wide temperature range. It offers a unique combination of properties not available with metals or other plastics and can be used for machining into gears, bushes and other engineering components for appliance, electronic, automotive, textile machinery and other applications.
Sizes :
Our range of polyacetal rods and sheets are available in following sizes:
Rods [ White ] : 6 MM OD - 6” OD; Length: 300 MM & 1000 MM
Rods [ Black ] : 12.5 MM OD – 5” OD; Length : 300 MM & 1000 MM
Sheets [ Black and White ] : 8 MM Thick – 75 MM Thick ; 300 x 300 MM; 300 x 600 MM; 600 x 1000 MM.
Properties :
Sr. No.
Particulars
Value
1
Density
1.41 - 1.42 g/cm3
2
Tensile strength at break
65 MPa
3
Elongation at break
50%
4
Torsional Modulus
2600 MPa
5
Volume Resistivity
1015 ohm cm
6
Surface Resistivity
2 x 1014 ohms
7
Dielectric Strength(Short time 2,3 mm)
32 MV/m
8
Coefficient of friction:
Static
Dynamic
0.20
0.35
9
Hardness
85° on D Scale
10
Water absorption(24 hrs. immersion)
0.32%
11
11. Maximum usage temperature:
Short term ( Several Hours)
Long term (Months to Years)
Polypropylene is an economical material, which delivers a combination of superior physical, chemical, mechanical, thermal and electrical properties. Compared to low or high-density polyethylene, it has high tensile strength and operating temperature.
Light in weight, resistant to staining, & low moisture absorption rate, Polypropylene offers excellent resistance to organic solvents, degreasing agents and electrolytic attack. It a tough, heat-resistant, semi-rigid material, suitable for the transfer of hot liquids or gases.
Sizes :
Our range of polyacetal rods and sheets are available in following sizes:
Ultra High Molecular Weight Polyethylene provides superior resistance to corrosion from chemicals and abrasive environments like sand and slurries when compared to other thermoplastics. It also offers exceptional impact resistance, even at cryogenic temperatures and is superior to stainless steel.
Important characteristics of UHMPWE include low moisture absorption, good electrical and thermal insulation, FDA acceptance for natural (virgin) grades, self-lubrication and chemical inertness (except in some acids).
In machined and fabricated part form, its uses include applications in material handling,
agricultural, power transmission and food processing machines as well as in medical devices, shipping and recreational equipment. Some important uses are as wear strips, chain guides, chute and hopper linings, bushings and truck bed liners.
Sizes :
We offer UHMPWE in following sizes :
Sheets (compression molded) - 6mm to 80mm x 1000mm x 2000mm & 10mm to 70mm x 1230mm x 2150mm
Rods - (Machined) - OD - 25mm to 100mm x 300mm L & (Molded) – OD - 20mm to 100mm x 1000mm L
Tapes – Thickness - 2mm to 10mm x 60mm (max.) wide
We offer quality PVC Rods sheets and profiles that are manufactured using extrusion technique. PVC offers excellent physical and mechanical properties. Some of the important characteristics of PVC are as follows:
It is glueable and weldable
Available in gray, white, and clear, in sheet, rod, or tubing
Highly machineable and heat bends nicely
This is a popular material for tanks and fittings
Commonly used for nuts, bolts, ducts, hoods, and process tanks
Properties :
Maximum Temperature – 158° F, 70° C
Minimum Temperature: - 13°F, -25°C
Autoclavable - No
Melting Point – 176° F, 80° C
Tensile Strength - 6,500 PSI
Hardness - R105
UV Resistance - Good
Clear
Rigid
Specific Gravity - 1.34
Sizes:
Rods [ Grey ] : 6 MM – 10 “ OD; Length - 1000 MM
Rods [ Red ] : 12.5 MM – 2” OD; Length - 1000 MM.
Sheets [ Grey [ Rigid] & Yellow & Clear {Flexible} ] :
Rigid sheets - 1 mm – 25 mm Thick; 1300 x 2000 MM & 1220 x 2440 MM
Flexible - 1 MM – 6 MM Thick; 1220 X 10 Mtrs Roll
![Polyacetal Rods & Sheets [Delrin]](images/delrin.jpg)
![Polypropylene Rods & Sheets [PP]](images/pp1.jpg)
